As someone who’s had a few issues with my garage door springs over the years, I’ve learned how to tighten them on my own. It’s a task that can be a bit intimidating at first, but with the right tools and techniques, it’s definitely doable.

Here are the steps I followed from Garage Door Repair Fort Lauderdale FL to tighten my garage door springs.


First, I always make sure to identify which type of springs my garage door has – torsion or extension – before starting. I don’t want to start tightening the wrong type of spring and cause any unnecessary damage.

Then, I gather all the tools and materials I need: a ladder, a socket wrench or adjustable wrench, a winding bar (for torsion springs), a vice grip or C-clamp (for torsion springs), safety glasses, and a level. Safety is always my top priority, so I make sure to wear the glasses and use the ladder safely.

I start by securing the garage door in place to prevent it from moving while I work on the springs. I use a C-clamp or vice grip to secure the door to the track, near the bottom of the door.

Next, if I have torsion springs, I release the tension in the springs before I can tighten them. I use a winding bar to turn the set screws on the spring system, located on the end of the torsion spring. I turn the set screws counterclockwise to release the tension in the springs, and I always make sure to keep my face and body away from the springs while doing this.

Once the tension has been released, I can start tightening the springs. I use a socket wrench or adjustable wrench to tighten the set screws on the spring system. For torsion springs, I make sure to tighten the set screws on both springs evenly, to prevent the door from becoming unevenly balanced. For extension springs, I adjust the tension on the springs by moving the hooks on the end of the springs to different holes on the track.

After I’ve tightened the springs, I check the balance of the garage door using the level to ensure that the door is level and plumb, and that it opens and closes smoothly. If the door is not balanced, I make further adjustments to the springs or the tracks.

Once I’m satisfied that everything is working properly, I remove the C-clamp or vice grip from the door and test the door by opening and closing it several times. The door should open and close smoothly and quietly, without any jerking or shaking. If the door is not functioning properly, I make further adjustments to the springs or the tracks as necessary.

Overall, as per Garage Door Repair Fort Lauderdale FL, tightening garage door springs is a task that requires patience and caution, but with the right tools and techniques, it’s something that can be done on your own. Just be sure to prioritize safety and take your time.

Fort Lauderdale Garage & Overhead Doors

701 E Las Olas Blvd, Fort Lauderdale, FL 33301, United States

954-466-8785