If you have a gap at the top of your garage door, it can allow unwanted air and debris to enter your garage. Fortunately, there are several ways to seal this gap.

Here are some steps from Garage Door Repair Springtown TX that you can follow to seal the gap at the top of your garage door:

  1. Measure the gap

Start by measuring the gap at the top of your garage door. Use a tape measure to determine the width of the gap, as well as the height and depth.

  1. Choose a seal type

There are several types of seals available that can be used to seal the gap at the top of your garage door. Some popular options include weatherstripping, brush seals, and rubber seals.

  1. Install the seal

Once you have chosen a seal type, follow the manufacturer’s instructions for installing it. Weather-stripping and rubber seals can typically be installed using adhesive, while brush seals may require screws or other hardware.

  1. Test the seal

After installing the seal, close the garage door and check for any gaps. You may need to adjust the seal to ensure that it is fully covering the gap.

  1. Check for additional gaps

In some cases, there may be additional gaps around the sides or bottom of the garage door. Check for any additional gaps and install seals as needed.

  1. Maintain the seal

To ensure that the seal remains effective, it is important to maintain it properly. Clean the seal regularly to remove any dirt or debris that may accumulate on it. Additionally, check the seal periodically to ensure that it is still in good condition and replace it if necessary.

Lastly, as stated in Garage Door Repair Springtown TX, you should be able to effectively seal the gap at the top of your garage door. This can help to keep your garage clean, dry, and free from unwanted air and debris.

Springtown TX Garage Door

205 Ave A, Springtown, TX 76082

817-373-5963