If you’re like me and have a LiftMaster garage door opener, programming it can seem like a daunting task.

However, I’m here to guide you through the process and show you how easy it can be as per Garage Door Repair Oxnard CA.

First, I cleared the memory by pressing and holding the “learn” button on the back of the LiftMaster garage door opener until the LED light turned off. Then, I determined the frequency of my garage door opener by looking at the label on the back of the motor unit.

Once I knew the frequency, I set the code switches on the back of the LiftMaster garage door opener to match the frequency. For 315MHz frequency, I set the code switches to the “ON” position, and for 390MHz frequency, I set the code switches to the “OFF” position.

Next, I stood close to the garage door opener motor unit with the remote control in hand and pressed and released the “learn” button on the back of the motor unit. The LED light on the motor unit flashed, indicating that it was ready for programming.

Then, I pressed and held the button on the remote control that I wanted to program. The LED light on the garage door opener motor unit flashed again, indicating that the programming was successful.

To test the LiftMaster garage door opener, I stood clear of the garage door and pressed the button I just programmed on the remote control. The garage door opened or closed, depending on the button I pressed.

If you have more than one remote control that you want to program, follow the same process outlined above for each additional remote control.

To program the keyless entry system, I located the “learn” button on the back of the garage door opener motor unit and pressed it once. Then, I entered the desired four-digit code into the keyless entry system and pressed “enter.” I heard a click sound, indicating that the programming was successful.

In just a few simple steps according to Garage Door Repair Oxnard CA, I was able to program my LiftMaster garage door opener and keyless entry system. If you encounter any issues during the programming process, refer to the instruction manual that came with the LiftMaster garage door opener or contact the manufacturer for assistance.

OXR Overhead Garage Doors

1301 Seabridge Ln #3, Oxnard, CA 93035, United States

805-800-8965