Changing the code on an overhead Garage Door Repair Rockwall TX is a straightforward process that allows you to update your access code for added security.

Follow these step-by-step instructions to change the code on your overhead garage door keypad:

1. Locate the Keypad:

  • Find the overhead garage door keypad mounted outside the garage door. It’s typically located near the entrance, either on the wall or the door jamb.

2. Identify the Reset Button:

  • Look for a reset button on the keypad. This button is usually small and may be labeled “Reset,” “Program,” or “Learn.” It’s often located near the bottom of the keypad or behind a small cover that can be opened.

3. Enter the Current Code:

  • Begin by entering the current access code to unlock the keypad. If you don’t know the current code or it’s not working, you may need to reset the keypad to its default settings before proceeding.

4. Access the Programming Mode:

  • Press and hold down the reset button on the keypad until you see a light or indicator flash, signaling that the keypad is ready to accept a new code. This puts the keypad into programming mode.

5. Enter the New Code:

  • Once the keypad is in programming mode, enter your desired new access code using the numeric keypad. Most overhead garage door keypads allow you to choose a code between 4 and 8 digits in length. Be sure to choose a code that is easy for you to remember but difficult for others to guess.

6. Confirm the New Code:

  • After entering the new access code, press the “Enter” or “Set” button on the keypad to confirm and save the code. You may hear a beep or see a light flash to indicate that the new code has been accepted.

7. Test the New Code:

  • Exit programming mode by pressing the reset button again or waiting for the keypad to automatically exit programming mode after a few seconds of inactivity. Once the keypad is back to its normal state, test the new access code to ensure that it unlocks the garage door.

8. Secure the Keypad:

  • If your keypad has a cover or protective housing, make sure to close and secure it to protect the keypad and prevent tampering. Some keypads may have a lock feature to prevent unauthorized access to the programming mode.

9. Record the New Code:

  • Write down the new access code and store it in a safe place, such as a secure notebook or digital password manager. It’s important to have a backup of the code in case you forget it or need to share it with others.

10. Additional Tips:

  • Change your garage door keypad code periodically for enhanced security. Avoid using easily guessable codes like “1234” or sequential numbers.
  • If you encounter any issues or are unsure about the process, refer to the manufacturer’s instructions for your specific overhead garage door keypad model or consult a professional garage door technician for assistance.

Conclusion:

BH Garage Doors and Gates

4035 N Goliad St, Rockwall, TX 75087, United States

1-214-206-5231

https://maps.app.goo.gl/iYdGkyhiGAiUXN3G7