We Select Texas Business Blog

The Largest Business Blog in Texas

Month: March 2023 Page 2 of 5

How to Change Your Garage Door Opener Battery – Reseda Garage Door Experts

By

On March 23, 2023

In Garage Door

Changing the battery in a garage door opener is a fairly simple task that can be completed in just a few steps.

Here’s a step-by-step guide from Reseda Garage Door that should help you change the battery in your garage door opener:

Step 1: Locate the battery compartment The first step is to locate the battery compartment in your garage door opener. The battery compartment is typically located near the motor unit of the garage door opener. In most cases, you’ll need to remove the cover of the battery compartment to access the battery.

Step 2: Determine the type of battery needed Once you’ve located the battery compartment, you’ll need to determine the type of battery that your garage door opener requires. Most garage door openers use a 9-volt battery, but some models may require a different type of battery. Check your owner’s manual to determine the correct type of battery needed for your garage door opener.

Step 3: Remove the old battery Before removing the old battery, make sure that the garage door opener is unplugged from the power source. Once you’ve done that, you can remove the old battery by gently pulling it out of the battery compartment.

Step 4: Insert the new battery Once you’ve removed the old battery, insert the new battery into the battery compartment. Make sure that the positive (+) and negative (-) terminals of the battery match up with the corresponding terminals in the battery compartment. You may need to push down on the battery to ensure that it’s securely in place.

Step 5: Test the garage door opener After inserting the new battery, plug the garage door opener back into the power source and test it to make sure that it’s working properly. If the garage door opener doesn’t work, check to make sure that the battery is installed correctly and that the terminals are making good contact.

Step 6: Replace the battery compartment cover If the garage door opener is working properly, you can replace the cover of the battery compartment. Make sure that the cover is securely in place to prevent the battery from falling out.

Tips in reference to Reseda Garage Door:

  • If you’re unsure of what type of battery your garage door opener uses, check the owner’s manual or contact the manufacturer for assistance.
  • If you’re having trouble removing the battery, use a small flathead screwdriver to gently pry it out of the battery compartment.
  • Always use a new battery when replacing the battery in your garage door opener. Using an old or used battery can cause the garage door opener to malfunction.
  • If you’re still having issues with your garage door opener after replacing the battery, it may be a sign of a larger problem. Contact a professional garage door repair technician to diagnose and fix the issue.

Reseda Garage Door Experts

Reseda, CA 91335

818-600-7035

Why Does Garage Door Weather-stripping Become Damaged Over Time? – Denzel’s Garage Door of West Palm Beach

By

On March 22, 2023

In Garage Door

Garage door weather stripping is designed to seal the gap between the garage door and the door frame, preventing air, water, and debris from entering the garage.

However, weather stripping can become damaged over time for a number of reasons according to Garage Door Repair West Palm Beach FL.

One of the most common causes of weather stripping damage is exposure to the elements. Weather stripping is constantly exposed to the sun, wind, rain, and snow, which can cause it to dry out, crack, and deteriorate. In addition, extreme temperatures can cause weather stripping to become brittle and break.

Another cause of weather stripping damage is wear and tear. Over time, the constant opening and closing of the garage door can cause the weather stripping to wear down, particularly in areas where the door rubs against the frame. This can cause the weather stripping to become thin or even tear, leaving gaps that allow air, water, and debris to enter the garage.

Improper installation can also cause weather stripping damage. If the weather stripping is not installed correctly, it may not provide a proper seal, leaving gaps that can allow air, water, and debris to enter the garage. In addition, if the weather stripping is not secured properly, it may come loose over time and become damaged.

Finally, pests can also cause weather stripping damage. Some rodents and insects may chew through weather stripping in order to gain access to the garage, leaving gaps that can allow air, water, and debris to enter.

In summary, as stated in Garage Door Repair West Palm Beach FL, in order to prevent weather stripping damage, it is important to choose high-quality weather stripping that is designed to withstand the elements. In addition, regular maintenance and inspection of the weather stripping can help to identify any signs of damage early on, allowing for prompt repairs. Finally, sealing any gaps or cracks in the garage door and door frame can help to prevent pests from damaging the weather stripping.

Denzel’s Garage Door of West Palm Beach

700 S Rosemary Ave Ste 100, West Palm Beach, FL 33401

561-220-1737

How to Stop Squeaky Garage Door – Santa Fe Springs Garage Door & Gates

By

On March 22, 2023

In Garage Door

A squeaky garage door can be annoying and may also indicate that there are underlying issues with your garage door system.

Here are some steps from Santa Fe Springs Garage Door that you can take to stop a squeaky garage door:

  1. Lubricate the moving parts: Apply a silicone-based lubricant to the hinges, rollers, tracks, and springs of your garage door. This will help to reduce friction and eliminate squeaks.
  2. Tighten loose hardware: Check the hardware on your garage door, including nuts, bolts, and screws, and tighten any that are loose. Loose hardware can cause your garage door to rattle and squeak.
  3. Replace worn or damaged parts: If you notice any worn or damaged parts on your garage door, such as rollers or hinges, replace them. Worn or damaged parts can cause your garage door to squeak and may also cause it to malfunction.
  4. Clean the tracks: Dirt and debris can accumulate in the tracks of your garage door, causing it to squeak. Clean the tracks with a soft brush or cloth to remove any buildup.
  5. Check the springs: If your garage door is still squeaking after lubrication and tightening of the hardware, the springs may be worn out or damaged. Springs are under high tension and should only be replaced by a professional garage door technician.
  6. Adjust the opener: If your garage door opener is causing the squeak, adjust the sensitivity settings. An overly sensitive opener can cause the door to jerk and squeak.
  7. Consider a professional inspection: If you have tried all of these steps and your garage door is still squeaking, it may be time for a professional inspection. A garage door technician can identify any underlying issues and provide recommendations for repair or replacement.

In conclusion, as per Santa Fe Springs Garage Door, a squeaky garage door is not only annoying but may also indicate underlying issues with your garage door system. Regular maintenance, lubrication, and inspections can help to prevent squeaks and ensure that your garage door is functioning properly. If you are unable to identify the cause of the squeak or if you suspect that there may be other issues with your garage door system, contact a professional garage door technician for assistance.

Santa Fe Springs Garage Door & Gates

11710 Washington Blvd, Santa Fe Springs, CA 90670

562-203-0740

How to Adjust Garage Door Cable Tension – Lakewood Garage Door Repair

By

On March 21, 2023

In Garage Door

Adjusting Garage Door Repair Lakewood OH cable tension is an important maintenance task that homeowners should know how to perform. The cables are responsible for holding the weight of the garage door, and when they are not properly tensioned, the door can become unbalanced and difficult to operate. In this article, we will explain the steps involved in adjusting garage door cable tension.

Before beginning any maintenance or repair work on your garage door, it is important to take safety precautions. Make sure that the door is fully closed, and unplug the opener to prevent accidental activation. Additionally, wear appropriate safety gear, such as gloves and eye protection.

Step 1: Locate the cables

The first step in adjusting the garage door cable tension is to locate the cables. The cables are typically located on either side of the door, running from the bottom of the door up to the springs. If you have trouble finding the cables, refer to the manufacturer’s instructions or consult a professional.

Step 2: Release tension from the cables

Before adjusting the tension, it is important to release any existing tension from the cables. To do this, use a pair of locking pliers or a vice grip to clamp the cable on one side of the door. Then, loosen the cable from the drum on the opposite side of the door by using a wrench to turn the adjusting bolt counterclockwise. Repeat this process on the other side of the door.

Step 3: Adjust the tension

Once the tension has been released, you can adjust the cable tension to the desired level. To do this, use a wrench to turn the adjusting bolt clockwise on one side of the door. As you turn the bolt, the cable will wrap around the drum and increase in tension. Continue tightening the bolt until the cable is at the desired tension level.

Repeat this process on the other side of the door, making sure to adjust both cables to the same tension level. It is important to keep track of how many turns you make on each bolt so that you can ensure that the cables are adjusted evenly.

Step 4: Test the door

After adjusting the tension, it is important to test the door to ensure that it is balanced and operating correctly. To do this, close the door and disconnect the opener by pulling the release cord. Then, manually lift the door to about halfway open. If the door stays in place, it is properly balanced. If the door begins to fall or rise, it may need further adjustment.

Step 5: Make additional adjustments if necessary

If the door is not properly balanced, you may need to make additional adjustments to the cable tension. To do this, repeat the steps outlined above until the door is properly balanced.

It is important to note that adjusting garage door cable tension can be a dangerous task. If you are unsure of how to perform this task or do not feel comfortable doing so, it is recommended that you consult a professional.

In addition to adjusting cable tension, there are other maintenance tasks that can help keep your garage door functioning properly. These include lubricating the moving parts of the door, inspecting the door for signs of wear and damage, and tightening any loose hardware.

In conclusion, adjusting Garage Door Repair Lakewood OH cable tension is an important maintenance task that can help ensure that your garage door is functioning properly. By following the steps outlined above and taking appropriate safety precautions, you can perform this task safely and effectively. If you have any concerns or questions about adjusting cable tension, do not hesitate to consult a professional.

Lakewood Garage Door Repair

1433 Arthur Ave #7, Lakewood, OH 44107, United States

1-216-510-9359

How Much Does A Garage Door Weigh – Premier Garage Door Repair

By

On March 21, 2023

In Garage Door

A Garage Door Repair Parma OH can weigh anywhere from 130 to 400 pounds depending on its size, material, and other factors. Generally, single-car garage doors are lighter than double-car garage doors. The weight of the garage door is an important factor to consider when installing a garage door opener or replacing a spring, as the opener or spring must be strong enough to handle the weight of the door.

It’s important to consult a professional if you’re unsure about the weight of your garage door or if you need assistance with installation or repairs.

In addition to the weight of the garage door, other factors can also affect its functionality and safety. For example, the type of material used to make the garage door can impact its durability, insulation, and maintenance requirements. Common garage door materials include steel, aluminum, wood, vinyl, and fiberglass, each with its own pros and cons.

It’s also important to consider the style of the garage door and how it fits with the overall look of the house. Some popular garage door styles include traditional raised panel, carriage house, and contemporary. Choosing a style that complements the house can increase curb appeal and add value to the property.

Proper maintenance and regular inspections are crucial to ensuring the safe and smooth operation of a garage door. This includes checking the springs, cables, tracks, and other components for wear and tear, lubricating moving parts, and cleaning the door surface. It’s also important to test the safety features of the garage door opener, such as the photoelectric sensors and auto-reverse function, to make sure they’re working correctly.

Overall, while the weight of a Garage Door Repair Parma OH is an important consideration, there are many other factors to think about when choosing and maintaining a garage door. Consulting with a professional and following recommended safety guidelines can help ensure a garage door that is functional, safe, and enhances the overall look and value of a property.

Premier Garage Door Repair

440-762-6587

How to Fix Garage Door hit by car – Sherman Oaks Garage Door & Gates

By

On March 21, 2023

In Garage Door, Uncategorized

If your garage door has been hit by a car, the damage can range from minor dents and scratches to major structural damage.

Here are the steps from Garage Door Repair Sherman Oaks CA that you can follow to fix your garage door:

Step 1: Assess the Damage The first step in fixing a garage door hit by a car is to assess the damage. Look for any dents, scratches, or structural damage to the door, tracks, and hardware. Determine the extent of the damage to determine if it can be repaired or if the door needs to be replaced entirely.

Step 2: Secure the Door If the door is damaged to the point where it won’t stay closed, it’s important to secure the door to prevent further damage or security concerns. Use locking pliers or clamps to secure the door in place.

Step 3: Repair Minor Damage If the damage is minor, you can use a plunger or a suction cup to pop out any dents in the door. For scratches, use touch-up paint or a spray paint designed for garage doors to match the color of the surrounding areas. If the tracks or hardware are damaged, you can replace individual parts as needed.

Step 4: Replace Major Structural Damage If the damage is more severe, you may need to replace the entire door. This involves removing the old door and tracks, and installing a new door and tracks. This is a complex process that requires special tools and knowledge, so it’s best to contact a professional garage door repair technician for assistance.

Step 5: Prevent Future Damage To prevent future damage to your garage door, consider installing protective barriers such as bollards or posts in front of the door. You can also use warning signs or other visual cues to help drivers avoid hitting the door.

In conclusion, as per Garage Door Repair Sherman Oaks CA, fixing a garage door hit by a car involves assessing the damage, securing the door, repairing minor damage, replacing major structural damage, and preventing future damage. If the damage is severe or you’re not comfortable with DIY repairs, it’s best to contact a professional garage door repair technician for assistance.

Sherman Oaks Garage Door & Gates

14702 Ventura Blvd, Sherman Oaks, CA 91403

310-361-6378

How to Reset Your Garage Door Keypad – Denzels Garage Doors

By

On March 20, 2023

In Garage Door

If your garage door keypad is not working properly, you may need to reset it. The process of resetting a garage door keypad is different from reprogramming it.

According to Garage Door Marina del Rey CA, here are the steps to follow to reset your garage door keypad:

Step 1: Remove the Cover of the Keypad

The first step in resetting your garage door keypad is to remove the cover. Depending on the brand and model of your keypad, the cover may be held in place with screws or clips. Use a screwdriver or a pry tool to remove the cover of the keypad.

Step 2: Locate the Reset Button

Once you have removed the cover of the keypad, you should be able to see the reset button. The location of the reset button may vary depending on the brand and model of your keypad. Refer to the owner’s manual of your keypad if you are unsure where the reset button is located.

Step 3: Press and Hold the Reset Button

Press and hold the reset button for approximately 10 seconds. This will reset the keypad to its default settings.

Step 4: Reprogram the Keypad

After you have reset the keypad, you will need to reprogram it. Follow the steps outlined in the previous section to reprogram your garage door keypad.

Step 5: Test the Keypad

Once you have reprogrammed the keypad, test it to make sure it is working properly. Stand outside your garage and enter the new code you just created on the keypad. The garage door should open. If the garage door does not open, repeat the programming process from step 2.

Step 6: Secure the Keypad

After you have reprogrammed the keypad, it is important to secure it to prevent unauthorized access to your garage. Make sure to mount the keypad securely to the wall using the screws provided. Keep the code you created private and do not share it with others.

In conclusion, as stated in Garage Door Marina del Rey CA, resetting your garage door keypad is a simple process that can be completed in just a few steps. By following these steps, you can ensure that your garage is secure and that only authorized individuals have access to it. If you need assistance with resetting your garage door keypad, it is best to consult with a professional.

Denzels Garage Doors

Marina del Rey, California

619-496-9419

How to Wire a Garage Door Opener – Hermosa Beach Garage Door Experts

By

On March 20, 2023

In Garage Door

Wiring a garage door opener involves connecting the opener to the electrical supply and programming the remote control or wall-mounted keypad. Properly wiring a garage door opener is essential for ensuring that the opener operates safely and efficiently.

I will provide a step-by-step guide from Garage Door Hermosa Beach CA on how to wire a garage door opener.

Step 1: Gather the necessary tools

To wire a garage door opener, you will need a few tools. These include a screwdriver, wire cutters, wire strippers, pliers, and electrical tape.

Step 2: Turn off the power

Before beginning any electrical work, it is important to turn off the power to the garage. Locate the circuit breaker that supplies power to the garage and turn it off.

Step 3: Install the mounting bracket

Begin by installing the mounting bracket for the garage door opener. This bracket is typically included with the opener and is designed to attach to the ceiling above the garage door. Use a drill to attach the bracket securely to the ceiling joists.

Step 4: Connect the power supply

The next step is to connect the power supply to the garage door opener. The power supply typically consists of a power cord and a plug. Connect the power cord to the garage door opener and plug it into an electrical outlet. If you prefer a hardwired installation, you can also connect the power cord directly to the electrical supply.

Step 5: Connect the control wires

Next, you will need to connect the control wires for the garage door opener. These wires are typically included with the opener and are used to connect the opener to the wall-mounted keypad and remote control.

To connect the wires, begin by stripping the insulation off the ends of the wires using wire strippers. Then, use pliers to twist the wires together. Finally, cover the twisted wires with electrical tape to prevent them from coming apart.

Step 6: Connect the safety sensors

Most modern garage door openers come with safety sensors that prevent the door from closing if something is in the way. These sensors are located near the bottom of the garage door and are connected to the opener using wires.

To connect the safety sensors, first, locate the sensor brackets on either side of the garage door. Attach the sensors to the brackets and connect the wires to the terminals on the opener.

Step 7: Program the remote control

The final step in wiring a garage door opener is to program the remote control or wall-mounted keypad. This process will vary depending on the manufacturer of the opener, so be sure to consult the manufacturer’s instructions.

In general, the process involves pressing a button on the opener to put it into programming mode, then pressing a button on the remote control or keypad to sync it with the opener. Once the remote control or keypad is programmed, test the opener to ensure that it is operating correctly.

In conclusion, according to Garage Door Hermosa Beach CA, wiring a garage door opener is a relatively simple process that can be completed in a few hours with the right tools and equipment. It is important to follow all safety precautions and consult the manufacturer’s instructions to ensure that the opener is wired correctly and operates safely.

Hermosa Beach Garage Door Experts

417 N Pacific Coast Hwy #26, Redondo Beach, CA 90277, United States

310-340-6130

How to Remove a Garage Door – Saginaw Best Garage & Overhead Doors

By

On March 16, 2023

In Garage Door

Removing a Garage Door Repair Saginaw TX can be a complex process, but with the right tools and knowledge, it can be done safely and efficiently.

In this guide, we will go through the steps to remove a garage door.

Before we begin, it is important to note that if you are not comfortable with any part of this process, it is best to hire a professional. Garage doors can be heavy and dangerous if mishandled, so safety should always be the top priority.

Tools Required:

  • Screwdriver
  • Adjustable wrench
  • Pliers
  • Clamps
  • Sawhorses
  • Power drill
  • Hammer
  • Pry bar
  • Assistant (optional)

Step 1: Disconnect the Garage Door Opener

Before you begin, it is essential to disconnect the garage door opener from the door. This will prevent the door from accidentally opening or closing while you are working on it. To disconnect the opener, pull the emergency release cord that hangs from the opener track. This should allow you to manually open and close the door.

Step 2: Secure the Garage Door

To prevent the door from falling while you work on it, you will need to secure it in place. You can use clamps or locking pliers to hold the door in place. Make sure to attach them to both sides of the door, close to the tracks.

Step 3: Remove the Hinges

Next, you will need to remove the hinges that attach the door to the frame. Start by loosening the screws that hold the hinges in place. Once the screws are loose, lift the door off the hinges. It is important to have an assistant to help you with this step, as garage doors can be very heavy.

Step 4: Remove the Track and Springs

After the door is removed, you can begin to remove the track and springs. Start by removing the bolts that hold the track to the frame. Once the bolts are removed, you should be able to lift the track off the frame. Next, you will need to remove the tension from the springs. This can be a dangerous step, so it is important to be cautious. Use a power drill to loosen the set screws on the springs, then use a winding bar to unwind the springs. Be sure to remove the springs slowly and carefully, as they are under a lot of tension.

Step 5: Remove the Brackets

Finally, you can remove the brackets that hold the track and springs in place. Start by removing the bolts that hold the brackets to the frame. Once the bolts are removed, you should be able to lift the brackets off the frame.

Step 6: Clean Up

After you have removed the garage door, it is important to clean up the area. Remove any debris or tools from the area, and dispose of them properly.

In conclusion, removing a Garage Door Repair Saginaw TX can be a complex process, but with the right tools and knowledge, it can be done safely and efficiently. Remember to prioritize safety and use caution throughout the process. If you are not comfortable with any part of the process, it is best to hire a professional.

Saginaw Best Garage & Overhead Doors

1029 N Saginaw Blvd #26, Saginaw, TX 76179, United States

1-940-532-8593

How to Program a LiftMaster Garage Door Opener – OXR Overhead Garage Doors

By

On March 16, 2023

In Uncategorized

If you’re like me and have a LiftMaster garage door opener, programming it can seem like a daunting task.

However, I’m here to guide you through the process and show you how easy it can be as per Garage Door Repair Oxnard CA.

First, I cleared the memory by pressing and holding the “learn” button on the back of the LiftMaster garage door opener until the LED light turned off. Then, I determined the frequency of my garage door opener by looking at the label on the back of the motor unit.

Once I knew the frequency, I set the code switches on the back of the LiftMaster garage door opener to match the frequency. For 315MHz frequency, I set the code switches to the “ON” position, and for 390MHz frequency, I set the code switches to the “OFF” position.

Next, I stood close to the garage door opener motor unit with the remote control in hand and pressed and released the “learn” button on the back of the motor unit. The LED light on the motor unit flashed, indicating that it was ready for programming.

Then, I pressed and held the button on the remote control that I wanted to program. The LED light on the garage door opener motor unit flashed again, indicating that the programming was successful.

To test the LiftMaster garage door opener, I stood clear of the garage door and pressed the button I just programmed on the remote control. The garage door opened or closed, depending on the button I pressed.

If you have more than one remote control that you want to program, follow the same process outlined above for each additional remote control.

To program the keyless entry system, I located the “learn” button on the back of the garage door opener motor unit and pressed it once. Then, I entered the desired four-digit code into the keyless entry system and pressed “enter.” I heard a click sound, indicating that the programming was successful.

In just a few simple steps according to Garage Door Repair Oxnard CA, I was able to program my LiftMaster garage door opener and keyless entry system. If you encounter any issues during the programming process, refer to the instruction manual that came with the LiftMaster garage door opener or contact the manufacturer for assistance.

OXR Overhead Garage Doors

1301 Seabridge Ln #3, Oxnard, CA 93035, United States

805-800-8965

Page 2 of 5

Previous

Next

Powered by WordPress & Theme by Anders Norén