Tag: garage door repair forney tx

When I noticed that my garage door was uneven, I knew it was time to take action. An uneven garage door can be a frustrating problem for homeowners, but it’s also a safety hazard. An uneven door can cause it to bind or rub against the frame, potentially leading to damage or even a complete failure of the door.

Here are some steps that I have taken to fix my uneven garage door according to Garage Door Repair Forney TX:

The first thing I did was to inspect the door and look for any obvious signs of damage, such as broken or bent parts. I couldn’t find any damage, so I moved on to check the springs, tracks, and rollers.

I discovered that the cause of the uneven door was due to the springs. They were worn out and needed to be replaced. I knew that dealing with garage door springs can be dangerous, so I decided to hire a professional to replace them.

Once the springs were replaced, I inspected the tracks for any misalignment or damage. I used a level to check the alignment and made the necessary adjustments. Then, I inspected the rollers for any wear or damage and lubricated them to ensure smooth movement.

After making these repairs, I tested the door by disconnecting the opener and manually opening and closing it. I checked the balance of the door by lifting it to the halfway point and letting go. I was happy to see that the door stayed in place, indicating that it was properly balanced.

In my case, fixing the uneven garage door required a combination of identifying the cause of the problem and taking the necessary steps to fix it. It was definitely a process that required patience and the right tools, but it was worth it to have a garage door that operates smoothly and quietly.

Overall, as per Garage Door Repair Forney TX, if you’re experiencing an uneven garage door, I recommend starting by inspecting the door for any obvious signs of damage, checking the springs, tracks, and rollers, and adjusting the door as necessary. If you’re unsure about the cause of the problem or don’t feel comfortable making the repairs yourself, don’t hesitate to call a professional garage door repair service. They will have the experience and tools necessary to diagnose and fix the problem quickly and safely.

Garage Door Experts of Forney

533 N McGraw St #6, Forney, TX 75126

469-224-1248

When I moved into my new house, one of the first things I noticed was that the garage door sensors were not properly aligned. The garage door would sometimes close partially and then reopen, which was quite frustrating.

So, I decided to align the sensors myself, and here is what I did based from Garage Door Repair Forney TX:

First, I gathered the necessary tools, including a tape measure, a level, a screwdriver, and a ladder. Then, I inspected the sensors to make sure they were clean and free of any debris or obstructions. Next, I checked the wiring connecting the sensors to the garage door opener to ensure they were secure and undamaged.

After checking the sensors, I moved on to adjusting their height. I used a tape measure to measure the height of each sensor from the ground. If there was a difference in height, I adjusted one of the sensors to match the other one. It was important to ensure that the sensors were installed at the same height, so they could function properly.

Next, I used a level to check if the sensors were installed straight. I placed the level vertically against each sensor to ensure that they were level. If the sensors were not level, I adjusted them accordingly by loosening the screws that held them in place and aligning them with the level.

Once I had adjusted the height and ensured that the sensors were level, I aligned them with each other. The sensors have a small light indicator that should be aligned with each other. The indicator light on one sensor should be directly facing the indicator light on the other sensor. I used a piece of string to help me align the sensors correctly. I tied the string between the sensors and adjusted them until the indicator lights were aligned with the string.

After aligning the sensors, I tested them to ensure they were functioning correctly. I opened the garage door and placed an object in the path of the sensors. The door should stop closing and reverse direction if the sensors are working correctly. If the door did not stop or reversed direction too soon, I made further adjustments.

Finally, I tightened the screws that held the sensors in place once I was satisfied that they were properly aligned and functioning correctly. It was important to remember to clean and inspect the sensors regularly to prevent any issues.

In conclusion, according to Garage Door Repair Forney TX, aligning garage door sensors was not as difficult as I initially thought it would be. It required a few simple tools and some patience, but it was a job that I was able to complete myself. I felt relieved knowing that the garage door would now close properly and safely every time.

BH Garage Door Repair of Forney

108 E Main St, Forney, TX 75126

469-820-3581