We Select Texas Business Blog

The Largest Business Blog in Texas

Month: February 2023

How Long Does a Garage Door Opener Last? – BH Garage Door & Gate of Frisco

By

On February 22, 2023

In Garage Door

As a homeowner, I was always curious about how long my garage door opener would last. After doing some research, I learned that the lifespan of a garage door opener can vary based on several factors as stated in Garage Door Repair Frisco TX. The quality of the device, the frequency of use, and the level of maintenance it receives all play a role in determining how long it will last.

I realized that choosing a high-quality garage door opener made by a reputable manufacturer could save me money in the long run by reducing the need for frequent repairs or replacements. I also learned that the frequency of use and level of maintenance could greatly affect the lifespan of my garage door opener. By taking proper care of my opener and using it only when necessary, I could extend its lifespan.

Another factor I learned was the type of garage door opener I choose can also affect its lifespan. There are several types of garage door openers available, and each has its pros and cons. Chain-drive openers are typically the most affordable but may require more maintenance, while belt-drive openers are quieter and require less maintenance but are more expensive. Screw-drive openers are also quiet and require minimal maintenance, but they may not be suitable for all types of garage doors.

As a homeowner, I also realized that there are several signs that may indicate that my garage door opener needs to be replaced. These include frequent breakdowns, unusual noises or vibrations, slow or erratic opening and closing, inconsistent performance, and safety concerns.

In conclusion, understanding how long a garage door opener typically lasts and what factors can affect its lifespan is essential for any homeowner, rerfer to Garage Door Repair Frisco TX. By choosing a high-quality opener, taking proper care of it, and recognizing the signs that it needs to be replaced, I can ensure that my garage door opener lasts as long as possible and provides reliable access to my garage.

BH Garage Door & Gate of Frisco

4350 Main St Suite 160, Frisco, TX 75034

972-366-4079

How to Open a Garage Door Manually – Plano East Garage Door

By

On February 22, 2023

In Garage Door

Hey there, if you ever find yourself in a situation where you need to open your garage door manually, don’t worry, it’s not too difficult! In any case, it’s important to know how to manually open your garage door safely and correctly.

In this guide, according to Garage Door Repair Plano TX, I’ll walk you through the steps of opening a garage door manually.

First, you’ll need to locate the emergency release cord, which is usually a red rope or handle that hangs from the garage door opener mechanism. Just give it a good tug to disengage the door from the opener.

Next, it’s time to lift the door manually. This might require some effort, depending on how heavy your door is. Use both hands and your legs to help lift the door evenly. Don’t try to lift it with your back or arms, as this can cause injury.

As you lift the garage door, make sure the area around the door is clear of any obstructions or debris to avoid accidents or damage to the door.

Once you’ve lifted the garage door to the desired height, you’ll need to secure it in place. You can use a vise grip or locking pliers to hold the garage door in place. Just place the locking pliers on the track of the garage door, just below the bottom roller. This will prevent the door from sliding back down and closing unexpectedly.

Now that the garage door is secured in place, you can safely enter or exit your garage. When you’re ready to close the garage door, just release the locking pliers and lower the door back down. Be sure to hold onto the door as it lowers to prevent it from slamming shut.

Keep in mind that manually opening your garage door should only be done in emergency situations. If you find yourself having to manually open your garage door frequently, it may be time to have it inspected by a professional to ensure that the garage door opener is working properly.

In addition to knowing how to manually open your garage door, it’s also important to take steps to prevent the need for manual operation. Regular maintenance and inspections of your garage door and opener can help prevent malfunctions and ensure that your garage door is functioning safely and efficiently.

In conclusion, opening a garage door manually is not too difficult, but it’s important to do it safely and correctly. By following these steps from Garage Door Repair Plano TX and taking precautions to ensure your safety, you can open and close your garage door manually when needed.

Plano East Garage Door

1201 E Plano Pkwy B, Plano, TX 75074, United States

972-640-7299

How to Replace Door Spring – MF Solutions

By

On February 21, 2023

In Garage Door

I recently had to replace the spring on my garage door, and it was a challenging task. However, I was able to do it with the right tools and careful attention to safety precautions.

Here’s my personal guide in reference to Garage Door Repair on how to replace a garage door spring:

First, I gathered all the necessary tools and materials, including a winding bar, vice grips, safety glasses, a ladder, and the replacement spring. I made sure to wear safety glasses to protect my eyes from any potential flying debris or springs.

Next, I released the tension on the old spring by using the winding bar to turn the spring counter-clockwise until it was fully unwound. I used vice grips to secure the spring to the track, which prevented it from accidentally unwinding and causing injury.

After that, I removed the bolts that secured the spring to the bracket using a socket wrench. Once the bolts were removed, I carefully slid the spring off of the bracket.

Then, I installed the new spring by carefully sliding it onto the bracket and aligning it properly. I secured the spring to the bracket with the bolts.

Next, I wound the new spring using the winding bar. I turned the new spring clockwise until it was under the same tension as the old spring. It was important to wind the spring slowly and carefully, using both hands to avoid injury.

Finally, I tested the new spring by opening and closing the garage door to ensure that it was functioning properly. I removed the vice grips from the old spring and disposed of it properly.

It’s important to note that garage door springs should always be replaced in pairs, even if only one spring is damaged or broken. This ensures that the springs are evenly balanced and that the door will function properly. It’s also essential to take proper safety precautions, such as wearing safety glasses and securing the old spring with vice grips.

Overall, based from Garage Door Repair, replacing the garage door spring was a challenging task, but with the right tools and safety precautions, it was doable. If you’re not confident in your abilities to replace a garage door spring, it’s best to hire a professional to avoid injury or damage to your garage door.

MF Solutions

9118 Elmwood Dr, Niles, IL 60714, United States

224-434-1780

How to Lubricate a Garage Door – Affordable Garage Door Repairs of Indianapolis, LLC

By

On February 16, 2023

In Garage Door

Lubricating your garage door is a simple and easy maintenance task that can help extend the life of your garage door and keep it running smoothly. By following these steps and choosing the right lubricant, you can help prevent damage to your garage door and ensure that it operates safely and efficiently. I recently did this task myself, and it was a relatively easy and straightforward process.

Here’s what I did in reference to Garage Door Repair Indianapolis :

First, I started by cleaning the tracks and rollers of the garage door using a clean cloth and a brush. I wanted to make sure that the surfaces were free of dirt and debris before I started lubricating.

Next, I chose a silicone-based lubricant that was specifically designed for garage doors. I found it at my local hardware store, and it came in a spray can, which made it easy to apply.

I sprayed a small amount of lubricant on each roller, hinge, and track, being careful not to over-lubricate. I also lubricated the springs, which are an important part of the garage door. I only used a small amount of lubricant on the springs, as I didn’t want to overdo it.

After applying the lubricant, I wiped away any excess with a clean cloth to prevent dirt and debris from sticking to the lubricant.

Finally, I tested the garage door to make sure it was running smoothly. I opened and closed the door a few times to distribute the lubricant and ensure that everything was working properly.

Overall, based from Garage Door Repair Indianapolis, lubricating my garage door was a relatively simple and quick task that didn’t take much time or effort. By doing this regularly, I can help prevent rust and wear and tear on the garage door components and ensure that my garage door operates safely and efficiently.

Affordable Garage Door Repairs of Indianapolis, LLC

Indianapolis

317-372-5337

Step by Step Process of Installing a Garage Door Opener

By

On February 15, 2023

In Garage Door, Uncategorized

In this guide from Garage Door Repair Kansas City, I will walk you through the step-by-step process of installing a garage door opener, from gathering tools and materials to programming the remote control.

Step 1: Gather Tools and Materials

The first step in installing a garage door opener is to gather all the necessary tools and materials. You will need a drill, screwdriver, pliers, hammer, level, measuring tape, and a ladder. Additionally, you will need the garage door opener unit, mounting brackets, safety sensors, and a remote control.

Step 2: Install the Mounting Bracket

The next step is to install the mounting bracket for the garage door opener. Start by attaching the bracket to the ceiling, using the screws and anchors provided in the kit. Make sure the bracket is level, and use a measuring tape to ensure it is centered over the garage door. Once the bracket is secured in place, you can attach the motor unit to it.

Step 3: Install the Rail and Trolley

Next, you need to install the rail and trolley system. Start by attaching the rail to the motor unit, and then to the mounting bracket. The trolley should then be attached to the rail, and the garage door arm attached to the trolley. Make sure everything is level and aligned properly before securing it in place.

Step 4: Install the Safety Sensors

Most garage door openers come with safety sensors that prevent the door from closing if there is an obstruction. Install the sensors by attaching them to the wall on either side of the garage door, about six inches above the floor. Make sure they are facing each other and aligned properly, and then run the wires from the sensors to the motor unit.

Step 5: Connect the Power

Next, you need to connect the power to the garage door opener. This can be done by plugging the power cord into an outlet, or by wiring the opener directly into the electrical system of your home. Follow the instructions carefully and make sure everything is connected securely.

Step 6: Test the Door

Before using the garage door opener, you need to test the door to make sure it is working properly. Start by disconnecting the opener from the door, and then manually open and close the door to make sure it is functioning smoothly. Once you are satisfied with the door’s operation, re-connect the opener and test it again.

Step 7: Program the Remote Control

The final step is to program the remote control. This can be done by following the instructions provided with the opener. Generally, it involves pressing a button on the motor unit and then pressing a button on the remote control. Once the remote control is programmed, you can use it to open and close the garage door from the comfort of your car.

In conclusion, installing a garage door opener can be a challenging but rewarding task. By following the steps from Garage Door Repair Kansas City outlined in this guide, you can install a garage door opener in your home with ease. Just remember to take your time, follow the instructions carefully, and don’t hesitate to ask for help if you need it. Good luck!

Team Taylor Doors

210 SW Market St Suite 144, Lee’s Summit, MO 64063, United States

816-408-6999

How to Replace Garage Door Opener- Arlington Overhead & Garage Door

By

On February 15, 2023

In Garage Door

Replacing my garage door opener was a task that I had been putting off for a while. However, I finally decided to take the plunge and replace it myself. With a little bit of research and some careful planning, I was able to successfully install the new opener in just a few hours.

Here’s how I did it based from Garage Door Repair South Arlington TX :

Step 1: Gather Your Tools and Materials

I started by gathering all the necessary tools and materials for the job. I made sure to have a new garage door opener that was compatible with my existing garage door and opener system, as well as wrenches, pliers, screwdrivers, a drill and drill bits, measuring tape, a stepladder, safety goggles, and a helper (optional).

Step 2: Remove the Old Opener

The first step was to remove the old garage door opener. I unplugged it from the electrical outlet and disconnected it from the garage door using a wrench and pliers. I made sure to label and organize all the pieces that I removed to make it easier to install the new opener later.

Step 3: Measure and Install the New Opener

I measured the distance between the top of the garage door and the ceiling to ensure that the new opener would fit. I then followed the manufacturer’s instructions to mount the new opener on the ceiling. Using a stepladder, I drilled the opener into the ceiling joists and installed any brackets or hardware that were required.

Step 4: Install the Rail and Trolley

The next step was to install the rail and trolley. I attached the rail to the ceiling, following the manufacturer’s instructions, and then attached the trolley to the rail.

Step 5: Attach the Garage Door Bracket and Arm

I attached the garage door bracket to the garage door and then attached the arm to the trolley. I made sure to attach the arm securely to the trolley and the door bracket, as this is what would open and close the garage door.

Step 6: Connect the Wiring

I then connected the wiring for the new opener. I carefully followed the manufacturer’s instructions to ensure that I connected the wires correctly. Before starting on the wiring, I turned off the power to the garage and used safety goggles to protect my eyes.

Step 7: Test the Opener

Once I connected the wiring, I plugged in the opener to the electrical outlet and tested it to make sure it was working correctly. I used the remote control to open and close the garage door and made sure it was opening and closing smoothly and without any problems.

Step 8: Adjust the Settings

The final step was to adjust the settings on the new garage door opener. I followed the manufacturer’s instructions to adjust the force and sensitivity of the opener so that it opened and closed the garage door correctly and safely. I also adjusted the travel limits to ensure that the garage door opened and closed fully.

Overall, I was pleased with how easy it was to replace my garage door opener based from Garage Door Repair South Arlington TX. With the right tools, materials, and instructions, anyone can replace their garage door opener themselves. Just be sure to take safety precautions and read the manufacturer’s instructions carefully to ensure a successful installation.

South Arlington Overhead & Garage Door

3330 Matlock Rd #204, Arlington, TX 76015, United States

817-383-2173

How to Paint a Garage Door – Garage Door Experts of North Arlington

By

On February 15, 2023

In Garage Door

Painting a garage door is a great way to improve the look of your home and increase its curb appeal. A freshly painted garage door can also help protect it from the elements, which is especially important if your garage is exposed to harsh weather conditions. In this guide that I got from Garage Door Repair, we will walk you through the steps of painting a garage door, including preparing the surface, selecting the right paint and tools, and applying the paint.

If I want to paint my garage door, the first thing I would do is clean and prepare the surface. I would use a scraper and wire brush to remove any dirt or old paint, and sand the surface to create a smooth surface for the new paint to adhere to. After cleaning the surface, I would select the right paint and tools.

I would choose a high-quality exterior paint that is designed for metal surfaces, and use a paintbrush and roller to apply the paint.
Before applying the paint, I would prime the surface to ensure good adhesion and a smooth finish.

I would apply a coat of primer using a paintbrush or roller, following the manufacturer’s instructions regarding the drying time. Once the primer has dried, I would apply the paint, starting with the edges and corners using a paintbrush and then using a roller or sprayer for the rest of the surface.

After applying the first coat of paint, I would allow the surface to dry completely before applying the second coat. Once the second coat has been applied, I would allow the paint to dry completely before using the garage door.

Finally based from Garage Door Repair, I would clean up any paint drips or spills using a damp cloth and clean my brushes, rollers, and paint sprayer according to the manufacturer’s instructions.

Garage Door Experts of North Arlington

711 Trinity Cir, Arlington, TX 76006, United

817-383-2114

Page 2 of 2

Previous

Powered by WordPress & Theme by Anders Norén